ADMISSION PROCEDURE

Within Mid November 2019 a personal internet access will be sent via e-mail to each company interested in exhibiting at PLAST 2021. In said area, companies may apply online, updating their references and specifying the required stand.

If the invitation is not received within above term, PLAST 2021 Secretariat is at your disposal (Samantha Stefanini, tel +39 02 82283756, s.stefanini@promaplast.org; or Eleonora Iula, tel +39 02 82283727, e.iula@promaplast.org).

We remark that:

companies applying within the first term of 10 February 2020 will benefit of a 20% discount (beside further possible discounts, as mentioned in article 11 of the General Regulations), off participation fees (article 8 of the Regulations):

• 250,00 euro/sqm for stands within 16-50 sqm

• 240,00 euro/sqm for stands within 51-100 sqm

• 230,00 euro/sqm for stands within 101-200 sqm

• 220,00 euro/sqm for stands within 201-400 sqm

• 210,00 euro/sqm for stands over 400 sqm.


After the first term, it will be possible to apply until the second and last term of 10 May 2020, however benefiting of a lower discount (10%) on above rates.


Possible surcharges (not discountable) for more open sides (article 8), indispensable services supplied by FIERA MILANO (article 9), admission fee (article 10) and insurance fee (article 29) remain applicable.

DISCOUNTS AND DEADLINES

Until 10.2.2020

20%

20% discount off raw space rental fees

After 10.2.2020 and until 10.5.2020

10%

10% discount off raw space rental fees

After 10.5.2020

0%

It will be possible to apply until space runs out, without prior guarantee of an appropriate location in the Hall for the exhibitor’s products

SUBDIVISION OF THE HALLS BY PRODUCTS AT PLAST 2021   

Product subdivision within PLAST 2021 halls will be defined after closing of applications (May 10, 2020), according to companies effectively applied.
For a general idea, halls’ subdivision from previous edition is available here below.

Hall 9

raw materials, additives, composites and regenerated materials, services for the plastics industry (satellite show "PLAST-MAT")

Hall 11

processing machinery, parts and components for Elastomers, foam, reactive resins, polyurethanes; semi-finished and finished products and services for the rubber industry (satellite show "RUBBER 2018"); laboratory test equipment; semi-finished and finished products for the plastics industry

Hall 13

extrusion lines for pipes and profiles, recovery and recycling machinery, thermoforming machinery, high-frequency welders; ancillary equipment, parts and components

Hall 15

extrusion lines for film, foils and sheets, flexo-printing machinery, bags and sacks making welders, packaging machinery, recovery and recycling plants; ancillary equipment, parts and components

Halls 22 and 24

injection molding machinery, blow molding machinery and rotational molding machinery, rapid prototyping and 3D printing systems ("3D PLAST"), recovery and recycling equipment; finishing, decorating and printing machinery; ultrasonic welders, ancillary equipment, moulds, hot runner systems, parts and components.

FURTHER INFORMATION

Exhibitors have been offered renewed services, including:

  • insertion in the internet portals Expopage and Smart Catalog of FIERA MILANO, active before and after the exhibition to assure maximum “visibility” online (in the previous edition more than 300.000 unique users visualized around 1.500.000 pages concerning exhibitors’ “virtual booths”
  • n.2 invitation-codes each sqm for the direct access of their guests during show hours
  • free wi-fi connection on site (200 kbps)
  • one free car park for each exhibitor
  • carpet along the aisles in the Halls

besides the promotional activities of our Organizing Secretariat, planning to attend even more international exhibitions of this sector, on the most widespread social networks, on internet portals of the sector, trade and business press, etc.

Also considering last edition (attended by 1,510 exhibitors from 55 Countries and 63,000 visitors from 117 Countries), PLAST will be the main date for our industry in Europe in 2021.

PLAST 2021 will join THE INNOVATION ALLIANCE: after its success debut in 2018, five international exhibitions (IPACK-IMA, MEAT-TECH, PLAST, PRINT4ALL and INTRALOGISTICA ITALIA) will offer again their respective professionals, with a single entrance ticket, a showcase of technological excellence from different manufacturing worlds, with a strong focus on the entire supply chain. A wide product range in one location, ranging from the processing of rubber and plastic to their recovery and recycling - also in view of always more sustainable and circular industrial processes - from food processing technologies to food and non-food packaging, from industrial printing to converting and labelling, right down to the material handling and the warehousing.

Information and assistance

For further information and assistance, or for receiving via e-mail the reserved link to access the online admission area, our organizing Secretariat remains at your disposal:

EXHIBITORS' RESERVED AREA

Reserved area will be activated within the end of August 2020 for companied applied within official deadlines.

LOST PASSWORD?

`